CERTEK Mobile Decontamination ChamberCOVID-19
MENU

CERTEK Mobile Decontamination Chamber (CMDC)

   

USA orders with specific options can be manufactured and ready for shipping in two (2) weeks.

International orders will take approximately three (3) weeks to manufacture for the same options.

The CERTEK Mobile Decontamination Chamber (CMDC) is manufactured in one-trip shipping containers. The above image is of a particular model that has a decontamination space of 199 square feet (18.48 sq.m.) for decontaminating N95 masks and other equipment. The actual dimensions of the space is 6’ 11 1/4” (2.1 m) wide by 33’ 8 1/8” (10.3 m) deep. The ceiling height is 7’ 4” (2.23 m).

Inside the double doors of the container is the End Service Space to house the VHP decontamination unit on a cart, electrical panel and some control devices. The panel can be fed from an outside source by utilizing a receptacle at the bottom of the panel with a matching plug provided. A four (4’ or 1.22 m) wide service door allows easy entrance of carts, equipment and personnel into the decontamination room. This End Service Space includes one (1) LED fixture to provide adequate lighting and one (1) duplex convenience outlet.

Inside the decontamination room there are seven (7) injection ports for model CMDC-4720-40, spaced inside the room to ensure overall VHP exposure. A ductless mini-split air condition and heat system is provided with two (2) evaporator AHU units inside the room. The condenser is located on the exterior of the container mounted high at the truck end. At the end of the room low on the wall at each corner are two (2) exhaust fans with dampers to the outside. A dehumidifier is also provided in the room. A quad outlet is located in the middle of a side wall of the decontamination space for connection of an owner provided decontamination machine that may be required to be placed in the space. LED fixtures provide adequate lighting in the room.

Other Available Models:

Model #: CMDC-4720-20 - A 20’ mobile unit with 99 square feet (9.19 sq. m.) of decontamination space.

Model #: CMDC-4720-40 - A 40’ mobile unit with 199 square feet (18.48 sq. m.) of decontamination space.

Model #: CMDC-4720-53 - A 53’ mobile unit with 263 square feet (24.35 sq. m.) of decontamination space.

Contact us for available options for each model.

Download Brochure

Download Data Sheet

 

Read a Social Media post concerning CERTEK's accomplishments in partnerships to help combat COVID-19.

         

CERTEK has partnered with Steris to offer a turnkey solution for a mobile decontamination chamber for decontaminating large scale N95 masks and other equipment. This partnership will support expedited delivery of the mobile decontamination chamber to include a Victory or M-100 VHP system. The mobile chamber was developed by CERTEK in collaboration with Duke Health and Novant Health. The chamber along with the Steris system can decontaminate an estimated 18,000 N95 masks per cycle. Two cycles per day could process 36,000 masks daily. CERTEK can deliver these chambers in days depending upon selected options. Together, CERTEK and Steris continues the fight against COVID-19. Visit our website and see additional features available for the decontamination chamber.

Click Here to read an article about CERTEK, its history, its world presence and its continued fight against COVID-19.

Contact Us for More Information

Telephone: +1-919-787-3989

Email: info@CERTEK-usa.com