SAFEPOD Modular Laboratories

The CERTEK Advantage

If you are in need of a safe and portable laboratory, consider the advantages you’ll receive when you order a modular SAFEPOD from CERTEK. The design and construction of each laboratory is designed with the consultation of a Biosafety Professional and delivered fully equipped and tested. Our laboratories are custom built and configured to your specific needs. Modular SAFEPOD laboratories can be customized to create a safe and affordable working environment for prime efficiency and maximum productivity.

ALL  LEVELS  OF  BIOCONTAINMENT,  ANIMAL  CONTAINMENT,  AGRICULTURAL  CONTAINMENT  AND  OTHER  MODULAR  DESIGNS.

Features and Benefits:

  • Components are stowed within for transport or in a separate equipment container if required
  • Easily and quickly placed into operation
  • Adaptable to multiple climates
  • All wall and ceiling penetrations sealed and tested air tight
  • Multiple equipment options
  • Multiple pods may be connected for more interior space

        

View Brochure             Watch The Virtual Tour

NOTE: Pods are shipping containers that may be shipped outside of the United States on container ships and across land on freight lines.

   

Indonesia ML3 Biological Lab Incubator
Custom Designed For Your Climate Multiple Units Class lll BSC
Mechanical Room
Mechanical Space Equipment Portability
 
SAFEPOD Modular laboratory SPECIFICATIONS SUMMARY
Services Provided by Owner
Potable Cold Water w/ adequate pressure Distilled Water, if required Standard Electrical, 3 Phase, 208v, or international voltages
Steam 50-80 psig, Max Usage 125#/Hr (if available) Emergency Electrical for critical systems or for the entire lab Sanitary Sewer
Communications    
structure
Shipping style container. (20' or 40' in length & 8'6" or 9'6" in height)
Airflow and Conditioning
Once through Air, HEPA (99.99%) In/Out Temperature: 72°F, ±4°
Rh: 50% +/- 10°		 6 + Air Changes/Hr., O.A.
Redundant Exhaust System Highly Efficient Cooling with Non-CFC Refrigerants Steam or Electric Heat and Reheat
Clean Side/Dirty Side Air Distribution Remotely Programmable Controls Airtight Penetrations
Electrical
Duplex Receptacles No More Than 4' Apart Separate Circuit for Biological Safety Cabinets (BSC’s) and Other Critical Equipment Telephone Outlets as required
Data Outlets as Required Airtight Penetrations Lighting: Foot Candle Requirements Will be United States NEC Code Compliant
Plumbing
All Traps to be Minimum 6" Piped Gas Systems as Required Water Heater for Hand Washing and Tepid Water
Tepid Water to Emergency Shower, Eye Washes and Sinks Airtight Penetrations Hand Wash Sinks as Required
optional Equipment
Distilled Water Piping - PVDF/PVC Class ll and class lll BSC’s (Exhausted [thimble] or Room Recirculated) Power Conditioner and/or UPS
Effluent Decontamination System (EDS) Ultra-Low Temperature Freezer Incubators
Refrigerator and/or Freezer Cage Rack/Isolator Cage Dump Isolator
Autoclave Generator w/ ATS Lab Decontamination System
Water Softener Humidifier and/or Dehumidifier
Equipment - Support
HEPA Filtered Supply (99.99%) HVAC unit w/ 100% outside air supply Exhaust System
Lab Pressure (-.08 to -.10" w.g.) Isolation Dampers, Manually Operated, Supply and Exhaust
Equipment - Control
Maintain Constant Supply CFM Variable Speed Blowers to Maintain Negative Pressure Pressure and Temperature Recorded Hourly
Multiple stages of negative pressure control w/ alarms to ensure the laboratory does not become positive pressure
Design, Construction, Delivery and Set-Up Requirements
Modular Laboratories may be delivered anywhere in the world and will be equipped per selected options and specifications. Purchaser (owner) must assume responsibility to ensure that all required services, electrical, communications, natural gas, water and sanitary sewage be routed to a specified location area for final connection. Set-up services may be arranged through CERTEK upon request. Each laboratory is designed with the consultation of a Biosafety Professional. The mechanical, electrical and structural systems are designed by registered Professional Engineers.